Stainless Steel Gas Sampling Cylinder
Stainless Steel Gas Sampling Cylinder is made of high quality stainless steel,with needle stainless steel cylinder valve.Stainless Steel Gas Sampling Cylinder is of corrosion resistance,resistance to high pressure,no leakage characteristics,widely used in gas and liguid sampling and preservation in petrochemical,electronic semi-conductor and scientific research & environmental protection and other fields.Must get the sampling cylinders drying and vacuum before sampling,drying temperature:80℃~100℃ and drying time not less than 30 minutes.If sampling accuracy requirement is high,应用拟充装介质置换。
Application:Specification:
Sampling cylinder is suitable for high pressure,inflammable,explosive and poisonous gas.Our company products two kinds of sampling cylinders: Stainless Steel Gas Sampling Cylinder and Aluminium Alloy Gas Sampling Cylinders.
Specification:
Work Pressue: WPa=4Mpa Volume:V=0.35L、0.5L
Work Pressue: WPa=10Mpa Volume:V=0.15L、0.2L、0.35L、0. 5L、1L
Work Pressue: WPa=15Mpa Volume:V=0.15L、0.2L、0.35L、0. 5L、1L、2L
Work Pressue: WPa=20Mpa Volume:V=0.15L、0.2L、0.35L、0. 5L、1L、2L
Meterial: SS304;SS316 (need to customaize)
Valve: two-terminal needle valve
outlet thread: W21.8-14-RH-EXT
瓶阀可配置不锈钢压力表(需定制)
操作指南:1, 瓶阀开关操作应均衡适当用力,不当操作会损坏阀门。
2, 液态气体采样介质饱和蒸气压应小于采样瓶工作压力,充装量应根据充装系数确定。
3, 气态采样充装严禁超压。
Next:Stainless Steel Gas Sampling Cylinder(with pressure gauge)
|